BRZZM - 37 589F1T MILP24441/2 R151 TY2
- MSDS: BRZZM
- Manufacturer: VALSPAR CORP
- Product Name: 37 589F1T MILP24441/2 R151 TY2
- National Stock Number: 8010-01-136-0689
Product Identification
Product ID:37 589F1T MILP24441/2 R151 TY2
MSDS Date:08/04/1988
FSC:8010
NIIN:01-136-0689
MSDS Number: BRZZM
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 612-332-7371
Info Phone: 612-332-7371
Cage: 13374
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
SILICA DERIVATIVES; (SILICON DIOXIDE (AMORPHOUS))
CAS: 67762-90-7
Fraction By Weight: 1%
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 25%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
EPOXY RESIN (PHENOL, 4,4'-(1-METHYL-ETHYLIDENE) BIS-,
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: 50%
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 25%
ACGIH TLV: 100 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF INHALED. MAY AFFECT
BRAIN, NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION. OVEREXPOSURE TO
INGREDIENTS IN PRODUCT MAY CAUSE NOSE AND THROAT IRRITATION, EYE
IRRITATION, SKIN IRRITATION. CHRONIC: POSSIBLE SENSITIZATION.
NOTICE: RPTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: HAVE ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALI NG CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:INHALATION: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING
HAS STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION AND GET MEDICAL
ATTENTION. EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:
WASH WITH SOAP AND WATER. INGESTION: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point:115F,46C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING APPARATUS OR AIRMASK
FOR LARGE SPILLS IN CONFINED AREA. WIPE UP OR ABSORB ON SUITABLE
MATERIAL AND SHOVEL UP . AVOID ALL PERSONAL CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAMES. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT STORE ABOVE
120F.
Other Precautions:BASED ON PROD FL PT & VAP PRESS SUITABLE STORAGE
SHOULD BE PROVIDED I/A/W OSHA REG 1910.106. EMPTY CNTNRS MAY
CONTAIN PROD RESIDUE, INCL FLAMM/EXPLO VAPS. DO NOT CUT,
PUNCTURE/WELD ON/NEAR CNTNR. ALL LBL WARNINGS MUST BE OBSERVED
(SUPDAT)
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED APPROPRIATE, PROPERLY
FITTED RESPIRATOR DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIREC TIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN CONFINED AREA, VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:NEOPRENE OR OTHER NONPOROUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NEOPRENE OR PLASTIC APRON AND PROTECTIVE
CLOTHING COVERING EXPOSED SKIN AREAS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PRECAUTIONS: UNTIL CONTAINER HAS BEEN CLEANED OR RECONDITIONED.
Chemical Properties
Boiling Pt:B.P. Text:326F,163C
Vapor Pres:4 @ 77F
Vapor Density:4.3
Spec Gravity:1.24
Evaporation Rate & Reference:0.1 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR COATINGS PRODUCT.
Percent Volatiles by Volume:35.79
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON
DIOXIDE/MONOXIDE, METAL OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.